Draining a flooded basement isn’t so hard as long as you follow these steps: check flood water status, examine the home’s exterior, conduct precautionary measures, ventilate the house, pump the water out, and clean up.
When the rainy season comes, a break in the sewer lines, or after a terrible storm, the most common problem that home owners with basements will face is flooding. Flood water can be damaging and, if left unsolved, can cause major and irreversible deterioration to your infrastructures, which may result in pricey repairs. Though you can drain the water yourself, sometimes you also need the help of professionals like Orange County water damage to do the job for you.
When trying to drain your flooded basement, here is a safe guide to follow:
Step 1: Check flood water status
The first thing that you need to do is check the status of the flood water. Determine its cause and see if the flood has receded. If the water is caused by a storm, ask your local officials if the calamity is over and if it is already safe to start cleaning up. If the flood is caused by a break in the sewer lines, report the problem to your officials to immediately fix the problem before it causes more damage to your property.
Step 2: Examine the home’s exterior
The first thing that you have to find out is if there is still standing flood water outside the house. There is no use draining the basement if there is still water that will seep back in. You may also need to check for downed power lines or trees. If there are existing problems, call the appropriate authorities to handle them. The last and most important thing that you will have to check is the foundation of the structure of your house. Look for cracks or any other signs of damage. If there are any, don’t attempt to start draining until reputable personnel, like a building inspector, tells you that it’s safe to do so.
Step 3: Conduct precautionary measures
After attending to possible hazards outside the house, you will need to check if the inside of the house is safe. See to it that the main floor water has receded. Make sure you turn off the electrical main switch and gas valves. These are just precautionary measures to ensure your safety.
Step 4: Ventilate the house
Open up windows and doors to ventilate the house. This will release the fumes inside the house and help everything dry out completely.
Step 5: Pump the water out
After completing steps 1 to 4, you are now ready to pump out the water in your basement. You may need to gather necessary equipment for the process, like a high powered flashlight, waterproof boots, a dust mask, work or rubber gloves, a hammer, screw drivers, a pipe wrench or pliers. Manually putting out the water can consume a lot of time and needs manpower, so you will likely need to use a powered pump. The pump should be gas-powered and not electric-powered. Working with electricity in water is very dangerous and poses a high risk of electrocution. Remember to gradually pump out the water 2 to 3 feet at a time and not all at once to prevent the walls from caving in.
Step 6: Clean up
Clean up all the mess after draining the basement. You might have to remove mud, silt, and debris on the floor and walls while it is wet before they harden. Sanitize the basement to prevent mildew and odor.
Always remember to deal with any flooding problems safely. There is no harm in asking for help if you don’t have any clue about what to do to solve your flooding problem.